iNSTRUCTA.si
BS · HR · SR · CG← BACK
HOW WE WORK WITH AI

The engineer signs.
The tool shortens the path to something checkable.

At iNSTRUKTA, artificial intelligence does not design structures. A licensed engineer does. The rules below come from the same place the profession does: a signature carries responsibility, and responsibility is not delegated.

The engineer no longer enters reinforcement. The engineer reviews it.
Every number the tool proposes carries its derivation and its clause. What cannot be checked does not leave the office.
AS OF 31 OCTOBER 2026
CHAIN

From formwork to drawings, on tools the profession already trusts.

The chain has no solver of its own. Through SAF and IFC the model goes to any proven analysis program; the tool does what lies between: the model, the input, the checks, the drawing and the documentation. At every hand-over the engineer reviews the result before it moves on.

  1. 01
    Formwork
    CAD · LAYER STANDARD
  2. 02
    Model
    SI · MODELING
  3. 03
    BIM model
    SI · FORMWORK
  4. 04
    Analysis
    PROVEN SOLVERS
  5. 05
    Reinforcement
    SI · REBAR
  6. 06
    Drawings
    TO OFFICE STANDARD
EIGHT RULES

Written from practice.

Automatic design does not exist. Whoever offers it is offering a signature without responsibility. That is why these rules do not describe what the tool can do, but where it stops and where the engineer begins.

  1. 01

    Responsibility does not pass to the tool.

    A licensed engineer signs the design and a licensed reviewer signs the review. The law requires a competent person; a tool is not one and will not become one.

  2. 02

    Rules in one place.

    Cover, anchorage, laps and hooks to EN 1992-1-1:2004, and seismic detailing to EN 1998-1:2004, live in one place. The tool that draws reinforcement does not duplicate them: the tool draws, the rules decide. One change to a rule applies everywhere.

  3. 03

    Every number traceable.

    Every bar keeps its recipe: the number, its derivation and the clause. The engineer does not check the result blind but follows the same path the tool took to reach it.

  4. 04

    Repetitive work goes by command, not by language model.

    Levels, slopes, rotated sections and similar routines are deterministic CAD commands. The language model is kept for the non-standard, where engineering review is mandatory anyway.

  5. 05

    Conservative until the engineer calibrates.

    The tool starts on the safe side. Conservatism is reduced only when a licensed engineer confirms it against the analysis.

  6. 06

    The existing structure is real.

    Tools that correct drawing geometry run only at the engineer's explicit request. In repair and refurbishment work a deviation in the drawing is often data, not an error.

  7. 07

    Experience before tools.

    Junior engineers get the tools only once they show they can do and check the same work by hand. Better right and slower.

  8. 08

    Tools have a shelf life.

    The logic is separate from the platform, so moving to another BIM tool needs only a new adapter. Moving to the second-generation Eurocodes is done in one place.